Canon MultiPASS C555 User Manual page 200

Reduction mode
See Automatic image reduction .
Registering
A process by which you place fax or telephone numbers, names, and other information
in the MultiPASS' memory.
Regular dialing
Pressing the individual numeric buttons to dial a fax or telephone number. Also known
as Manual dialing.
Remote receiving ID
The two-digit code that enables you to manually activate reception of a fax using a
telephone or an extension phone connected to the MultiPASS. (The default code is 25.)
Remote reception
Activating reception of a fax by answering a telephone or an extension phone that is
connected to the MultiPASS, but that is not located near the MultiPASS. You need to
dial the remote receiving ID to start reception of a fax.
Report
A document printed by the MultiPASS containing information about the faxes it has sent
or received.
Resolution
The density of dots for any given output device. Expressed in terms of dots per inch
(dpi). Low resolution causes font characters and graphics to have a jagged
appearance. Higher resolution means smoother curves and angles, as well as a better
match to traditional typeface designs. Resolution values are represented by horizontal
data and vertical data, for example, 360 360 dpi.
Rotary pulse
A telephone dialing system where a dial is rotated to send pulses to the telephone
switching system. When you pulse dial, you hear clicks. When you touch-tone dial, the
most common dialing system, you hear tones.
RX
See Receiving .
S
Scanning contrast
A setting that darkens or lightens the scanning of documents.
Sender ID
Information printed at the top of a fax (also called TTI or Transmit Terminal ID ). This
data appears only if the sending fax machine has been programmed with the
information.
G-9
Glossary