Setting Up Fax Options In The Desktop Manager - Canon MultiPASS C530 Software Manual

Setting Up Fax Options in the Desktop Manager

The Desktop Manager contains setup options that define the operation of faxing with your
MultiPASS. Although you can set MultiPASS fax options directly in the device itself, you can
also set the options in the Desktop Manager. You can set options that affect general operation
preferences, sending a PC fax, receiving a fax, and using the speed dial.
When you first install the Desktop Manager, setup options are set to appropriate default
settings. The default settings enable you to begin using your MultiPASS with the Desktop
Manager immediately. However, you can change option settings as needed.
Because you can make changes to most option settings either on the MultiPASS or in the
Desktop Manager, be aware of the following:
Any option setting you make on the MultiPASS does not appear in the Desktop Manager
Setup Options dialog box.
Any change you make to an option in the Desktop Manager overrides the corresponding
setting you may have made on the MultiPASS device itself.
Therefore, before you make changes to these option settings, decide where you prefer to make
your changes — on the MultiPASS or in the Desktop Manager. Establishing a preference for
changes will help you avoid inadvertently overriding your previous settings.
Chapter 6 Utilities
6-3