Canon MultiPASS C530 Software Manual page 291

Report Print
You can specify whether or not you want a report to print with each fax reception, or only
when there is an error.
Restoring the Default Settings
If you want to restore the option default settings after making changes, click Use Defaults.
Chapter 6
If your MultiPASS is not ready:
If you set your MultiPASS to print incoming faxes, rather than to send them to your
computer, select how you want to handle faxes if the MultiPASS is not ready (for
example, if the printer is out of paper).
If you choose to receive the faxes into memory, the incoming faxes are saved until you
are able to print them. If you choose to not to receive faxes, only the first fax that
encounters the error is saved. No subsequent incoming faxes are saved in memory.
It is recommended that you set your system to receive faxes into memory.
Utilities
6-14