Canon MultiPASS C530 Software Manual page 310

To open the Desktop Manager from the Status Monitor icon:
Click Go To Manager on the Status Monitor menu.
To specify the Status Monitor as the top window:
Click Always On Top on the displayed menu.
To reconnect the printer (if previously disconnected):
Click Reconnect on the Status Monitor menu.
To display the port on which the MultiPASS is connected:
Click Device Information on the Status Monitor menu.
To start the Status Monitor when you start Windows:
Click Load on Windows Startup on the Status Monitor menu.
To close the Status Monitor:
Click Close on the Status Monitor menu.
Chapter 6 Utilities
6-33