Canon MultiPASS C530 Software Manual page 72

Upload the fax to the Desktop Manager
You can set the MultiPASS so that received faxes are automatically moved to the Desktop
Manager. By uploading a fax, you store a copy of it in your In Box allowing you to review,
annotate, print, or resend the fax to another recipient.
If Your Computer Is Off
If your computer is turned off when the MultiPASS receives a fax, the MultiPASS handles the fax
using one of the following methods, based on how you defined your setup options:
Print the fax directly from the MultiPASS
If your computer is going to be off for a while, or you are expecting many incoming faxes, it
is recommended that you set the MultiPASS to automatically print incoming faxes. This
recommended setting enables you to leave the computer off for a period of time and still be
assured of receiving your faxes. You can always later scan a printed fax into the Desktop
Manager.
Save the fax in MultiPASS memory
If you set the MultiPASS to save a fax in memory, it can later be printed directly to the
MultiPASS, or sent to the Desktop Manager when your computer is turned on.
Chapter 3 PC Faxing
3-21