Canon MultiPASS C530 Software Manual page 295

Remote Receive
You select this option so that you can set the MultiPASS, from a telephone extension, to
receive a fax if an incoming call is ringing on the MultiPASS. If you select this option, you
must assign a remote identification number that signals the MultiPASS to receive the fax.
Remote Identification Number
If the Remote Receive option is selected, you assign the identification number you will use
to set the MultiPASS to receive a fax.
DRPD Switch Options
You can select this option if you subscribe to the Distinctive Ring Pattern Detection
(DRPD) service through your phone company. You then specify each ring pattern you have
been assigned, with its associated action, fax ID, and fax number.
When you select this option, the Receive mode is automatically set to receive both fax and
telephone calls.
Ring Pattern
If you subscribe to DRPD through your phone company, select the ring pattern assigned to
each phone number by your phone company: Normal (single-ring), Double (double-ring),
S-S-L (short-short-long ring), S-L-S (short-long-short ring), or Other.
Action
If you subscribe to DRPD through your phone company, select the call type to be received
for each selected ring pattern. Typically, you would specify telephone calls for one ring
pattern and fax calls for the other ring pattern. However, if necessary, you can specify that a
selected ring pattern switch between receiving telephone and fax calls.
Chapter 6 Utilities
6-18