Canon MultiPASS C530 Software Manual page 30

Defining the Toolbar Settings
You can define the following options on the Toolbar Settings tab.
When Scan Push Button Pressed
You define the desired action that occurs when you push the scan button on your
MultiPASS. In the When Scan Push Button Pressed box, select the desired action. For
example, you can set the button to display the Toolbar, or to send the scanned document to
a particular destination, such as fax.
Show ScanGear Before Scanning
Click to display the ScanGear window when you scan a document in the Toolbar. When the
ScanGear window is displayed, you can set and adjust scan options, and then rescan the
document, before accepting the final scanned image. The options you set override the scan
options set in the Toolbar.
If this option is cleared, the image is scanned based on the scan settings defined in the
Toolbar.
Preview
Click to display a preview image during the scanning of a document in the Toolbar
progress dialog box. This option enables you to preview the image before accepting or
canceling the image.
If this option is cleared, the image is immediately sent to its destination.
Chapter 1 Introduction 1-21