To display the port on which the MultiPASS is connected:
Click Device Information on the Status Monitor menu.
To return to the MultiPASS Status Monitor icon:
Click Minimize on the Status Monitor menu.
To start the Status Monitor when you start Windows:
Click Load on Windows Startup on the Status Monitor menu.
To close the MultiPASS Status Monitor:
Click Close on the Status Monitor menu.
Status Messages
The MultiPASS Status Monitor reports the following statuses for the MultiPASS.
Idle
This status indicates the MultiPASS is currently inactive.
Scanning
This status indicates the MultiPASS is scanning an image. The Status Monitor window
displays the number of the page currently being scanned.
Printing
This status indicates the MultiPASS is printing a document.
Chapter 6
Utilities
6-35