Restarting the MultiPASS Connection
If you reconnect the MultiPASS to the port and want to begin using the Desktop Manager again,
the connection between your MultiPASS and MultiPASS system automatically restarts when you
restart your computer. You can also restart the MultiPASS connection without restarting your
computer.
To restart the MultiPASS connection without restarting your computer:
1. If you are using Windows NT, restart the MultiPASS Service. (For details, see your Windows
NT documentation.)
If you are using Windows 98 or Windows 95, skip to Step 2.
2. If not currently open, open the MultiPASS Status Monitor window.
If the MultiPASS Status Monitor is already open, display the Status Monitor menu and click
Reconnect.
n
The
Reconnect
device while the Status Monitor is running.
Chapter 6
button will be active is the printer cable is connected to another parallel port
Utilities
6-38