Canon MultiPASS C50 User Manual page 71

3. Set the paper thickness lever to left, centre, or right according to the
following table:
Medium
Plain paper
LC-301 water resistant paper
Envelopes
HR-101 high-resolution paper
GP-101 glossy paper
CF-102 transparencies
BF-102 back print film
HG-101 high-gloss film
FS-101 fabric sheet
TR-101 T-shirt transfers
C
Do not try to manually move or stop the cartridge holder, or you may
damage the MultiPASS C50.
4. Close the printer cover.
5. Press CARTRIDGE again to move the cartridge holder back to its
CARTRIDGE
home position.
Chapter 2
Lever position
Black Colour
Left Centre
Left Centre
Right
Centre
Centre
Centre
Centre
Centre
Right
Right
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
ROUND SHAFT
Setting Up Your MultiPASS C50
2-43