Canon MultiPASS C50 User Manual page 211

Problem
The MultiPASS C50 will The MultiPASS C50 may
not switch between
telephone and fax
calls automatically
The MultiPASS C50
will not receive faxes
manually
Chapter 8
Possible cause
not be in Fax/Tel Mode.
The MultiPASS C50 may
have a document in memory. stored in memory. See page
An error may have
occurred during reception.
The sheet feeder may
be empty.
The sending fax machine
may not send the CNG
signal that tells the
MultiPASS C50 that the
incoming signal is a fax.
You may not have pressed
the (START/COPY)
button before hanging
up the handset.
Solution
For the MultiPASS C50
to switch automatically
between telephone and
fax calls, it must be in
Fax/Tel Mode. See page
5-2.
Print out any documents
5-14.
Check the LCD display for
an error message. See page
8-30 for a listing of the
MultiPASS C50's error
messages.
Print an activity report and
look for an error code. See
the MultiPASS Desktop
Manager User's Guide.
Make sure the sheet feeder
has paper in it.
In such cases, you will have
to receive the document
manually. See page 5-6.
Always press the
(START/COPY) button
before hanging up the
handset. If you hang up
before pressing the
(START/COPY) button,
you will disconnect the call.
Troubleshooting
8-15