Adjusting The Paper Thickness Lever - Canon MultiPASS C50 User Manual

Adjusting the Paper Thickness Lever

Before loading a print medium into the MultiPASS C50, use the paper
thickness lever to adjust the gap between the print head and the print
paper to suit the paper's thickness.
N
If the gap between the print head and the paper is not adjusted
properly, smudging or otherwise poor print quality can result.
Set the paper thickness lever as follows:
1. Press CARTRIDGE to move the cartridge holder to the centre of the
CARTRIDGE
unit.
2. Open the printer cover by grasping the document guides and lifting.
C
Do not try to move or stop the cartridge holder manually, or you may
damage the MultiPASS C50.
2-42
Setting Up Your MultiPASS C50
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
ROUND SHAFT
Chapter 2