If A Power Cut Occurs; Memory Clear Report - Canon MultiPASS C50 User Manual

If a Power Cut Occurs

If power to the MultiPASS C50 is cut off, any documents stored in its fax
memory will be lost. (The MultiPASS C50 automatically prints a list of
the lost documents when power is restored.) Because of this, you should
be sure to print documents stored in memory or resend them as soon as
possible.
While power is off, you can only use the MultiPASS C50 to receive
telephone calls (if you have a telephone connected). You cannot make
calls, or send or receive faxes.

Memory Clear Report

If you experience a power failure, all documents stored in memory will
be lost. As soon as power is restored, the MultiPASS C50 will
automatically print a list of documents that were stored in memory
before the power failure.
1 6 / 1 2 9 8 W E D 1 0 : 1 2
TX/RX NO
0001
0002
N
If there are one or more documents in the image memory when the
power is cut off, the LCD will display PRINTING REPORT when the
power is restored. If there is no paper in the sheet feeder at this time, the
LCD will also display LOAD PAPER. If this happens, load paper in the
sheet feeder, press the
print the Memory Clear Report. You will be unable to send documents
or receive faxes in memory until you do this. If you have no paper
available and you urgently need to send a document or receive a fax in
memory, press the
However, please note that once you have pressed the
the unit will no longer print the Memory Clear Report.
Chapter 4
F A X 3 2 1 4 5 6 7 7 7 7

MEMORY CLEAR REPORT

MEMORY FILES DELETED
MODE CONNECTION TEL/ID
B'CAST [ 01] Canon TOKYO
[ 02] Canon ESPAÑA
TRANSMIT [ 01] Canon TOKYO
(START/COPY) button and wait for the unit to
(STOP) button to enable sending and receiving.
C A N O N U . S . A .
PGS. SET TIME
3 17/12 98 09:07
1 17/12 98 10:02
Sending Faxes
0 0 1
.
ST. TIME
04:30
02:00
(STOP) button,
4-29