Download Print this page

Canon PIXMA MX522 Manual

Windows os
Hide thumbs

Advertisement

Next >>
<< Previous
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MX522
Windows OS
1

Advertisement

loading

  Summary of Contents for Canon PIXMA MX522

  • Page 1 Next >> << Previous Installing Your Multifunction to Additional Computers on Your Network PIXMA MX522 Windows OS...
  • Page 2 << Previous Next >> Installing Your Multifunction to Additional Computers on Your Network PIXMA MX522 Windows OS Preparing to Connect My Multifunction to My Network Network Requirements Notes on Wireless Connection Installing the Drivers...
  • Page 3: Network Requirements

    Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.
  • Page 4 Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
  • Page 5: Software Installation

    Setup CD-ROM during restarting. The installation resumes once your computer has restarted. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.
  • Page 6: Wireless Network

    << Previous Next >> Installing the PIXMA MX522 to additional Windows computers on your Wireless Network If your MX522 has already been set up on your wireless network , it is only necessary to install the software on the additional computer(s).
  • Page 7 Installing the Drivers & Software << Previous Next >> When the Software Installation List screen appears, select any software to be installed. MP Drivers is required for the printer to be able to print and scan and cannot be de-selected. My Image Garden and Quick Menu are highly recommended to take full advantage of your printer’s features.
  • Page 8 Installing the Drivers & Software << Previous Installing the PIXMA MX522 on Your Wireless Network If you can’t find or use your Setup CD-ROM, you may download the MX520 series MP Drivers , which includes a step-by-step installation, by following the instructions below: Click here to access the MX522 Drivers &...