Canon MultiPASS C50 User Manual page 47

2. Plug the other end of the power cord into the outlet.
N
The MultiPASS C50 has no power switch, so its power is on as long as
it is plugged in. Once connected, though, the unit still needs to warm
up before you can use it. Depending on the number of pages
accumulated in its memory, the MultiPASS C50 can take up to four
minutes to warm up.
N
If the BJ cartridge has not been installed yet, the message PUT IN
CARTRIDGE alternates with the standby mode display:
Chapter 2
While the MultiPASS C50 is warming up, the message PLEASE
WAIT appears in the LCD display:
PLEASE WAIT
When the time and receive mode appear, the MultiPASS C50 is
in standby mode and ready for use:
13:30 FaxOnly
PUT IN CARTRIDGE
13:30 FaxOnly
Setting Up Your MultiPASS C50
2-19