Loading Print Media For Manual Feed - Canon MultiPASS C50 User Manual

Loading Print Media for Manual Feed

Follow the steps below to manually feed heavier-weight media
(90–105 g/m
N
You will need to select manual feed from the print dialog box of your
Windows application before printing. (See the MultiPASS Desktop
Manager User's Guide for instructions.) Load the sheet when the dialog
box prompts you to do so. If you attempt to load the sheet without
selecting manual feed, the sheet will be ejected.
1. Open the printer cover by grasping the document guides and lifting.
2. Hold the sheet with its print side facing upwards, and align the
sheet with the left edge of the manual feeder (located at the back of
the unit).
3. Insert the sheet until it stops, and continue to hold the sheet until the
MultiPASS C50 "grabs" the sheet and pulls it in to the proper
position.
4. After the sheet is loaded, open the printer cover and make sure the
sheet is set straight. If necessary, pull the sheet out and load it again.
5. Close the printer cover.
Chapter 2
) into the MultiPASS C50.
2
Make sure the paper thickness lever is set properly for the type
of media you are using. See "Adjusting the Paper Thickness
Lever" on page 2-42.
Setting Up Your MultiPASS C50
2-49