Replacing the BJ Cartridge
When replacing BJ cartridges, always follow the precautions and
cartridge selection guidelines given in "Guidelines for Using and
Maintaining BJ Cartridges" on page 2-27.
Replace the BJ print cartridge as follows.
1.
Make sure the MultiPASS C50 is plugged in.
2.
Press CARTRIDGE.
CARTRIDGE
3.
Open the printer cover by grasping the document guides and lifting.
C
Do not try to move the cartridge holder manually or you may
damage the MultiPASS C50.
The MultiPASS C50 includes an automatic protection feature that
helps keep it from overheating. If the cartridge holder does not
move, unplug the MultiPASS C50 and let it cool for several minutes.
When it has cooled, plug it in again, and press the CARTRIDGE
button to move the cartridge holder.
9-12
Maintaining Your MultiPASS C50
The cartridge holder moves to the centre of the unit.
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
ROUND SHAFT
Chapter 9