Canon MultiPASS C50 User Manual page 97

Setting
ALARM VOLUME
LINE MONITOR VOL Sets the volume of the line
RX CALL LEVEL
TEL LINE TYPE
COLOR COPY MEDIA
PRINT REPORT
ACTIVITY REPORT
SPEED DIAL LIST
USER'S DATA LIST
R-KEY SETTING
M-KEY SETTING
(UK only)
MID PAUSE SET
(UK only)
* The factory default setting is ROTARY PULSE for all countries except the UK and Singapore.
The factory default setting for the UK and Singapore is TOUCH TONE.
** The pause length can only be adjusted in the UK. The pause length is fixed to four seconds in
Hong Kong, and to two seconds in all other countries.
Chapter 2
Description
Sets the volume of the error
alarm sound.
monitor (sound during
dialling).
Sets the volume of incoming
calls.
Sets the dialling method the
MultiPASS C50 uses to match
the type of line you have.
Sets the print media type
when making copies.
Prints a record of the last 20
trasmissions your unit sends
or receives.
Prints a list of registerd
telephone numbers.
Prints information registered
in your unit.
Sets the PBX type through
which your unit is connected.
Sets the access and ID code
for the 2300 service of Mercury
Communications Limited.
Sets the length of the pause
entered by each press of the
(REDIAL)/PAUSE button.
Setting Up Your MultiPASS C50
Settings Page
VOL MID/
VOL MAX/
OFF/
VOL MIN
VOL MID/
VOL MAX/
OFF/
VOL MIN
STANDARD/
HIGH
ROTARY PULSE*/
TOUCH TONE
PLAIN PAPER/
HIGH RES. PAPER
— —
— —
— —
PSTN/
PBX
OFF/
ON
04 SEC**
(04–11)
2-71
2-71
2-72
2-58
2-72
4-20
4-25
2-72
2-69