Memory Sending - Canon MultiPASS C50 User Manual

Memory Sending

Memory sending is a quick and easy way to send a fax. When you use
memory sending, the MultiPASS C50 scans the document into its
memory as it dials the fax number. If the line is free, the MultiPASS C50
begins sending the fax as it scans the rest of the document.
The MultiPASS C50 has enough memory to store up to 42 pages (fewer
if the document contains many graphics or particularly dense text).
Since the MultiPASS C50 is a multitasking device, you can use memory
sending to scan one document into memory and at the same time send
another fax, receive a fax, or print a document. Follow the instructions
below to send a document with memory sending:
N
Be sure to adjust the document feed lever before loading your document.
See page 6-5 for details.
1. Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
Once the document is loaded, the LCD display shows the following:
4-10
Sending Faxes
MEMORY USED
STANDARD
DOCUMENT READY
If necessary, you can adjust the resolution and contrast. See page
4-3 for details.
You may not be able to use memory sending if the percentage
shown in the MEMORY USED display is close to 100%. In this
case, use manual sending via the handset to send your document.
(Currently used image memory)
0%
(Current resolution)
(Standby to scan)
Chapter 4