Sending A Document Using Group Dialling - Canon MultiPASS C50 User Manual

Manual dialling: enter the number using the numeric buttons, then
ABC DEF
1 2 3
press START/COPY to add the number to the broadcast list. (You
GHI JKL MNO
4 5 6
can only enter one number manually.)
PQRS TUV WXYZ
7 8 9
0
N
After entering the first one-touch speed dialling button or coded
speed dialling code, you have five seconds to enter another speed
dialling button or code before the MultiPASS C50 begins sending
automatically. If you have entered more than one speed dialling
button or code, the MultiPASS C50 waits for 10 seconds before it
begins sending.
If you want to review the numbers you entered, press the
FUNCTION button and use the < < or > > button to scroll through the
numbers.
3. When you finish entering numbers, press START/COPY to begin
sending, or wait a few seconds for the MultiPASS C50 to begin
sending automatically.
N
If the MultiPASS C50's memory becomes full while scanning your
document, MEMORY FULL appears in the LCD. If this happens, remove
the remainder of the document from the Automatic Document Feeder
(ADF) (you may need to open the operation panel to do so), then divide
the document into several sections and send each section individually.

Sending a Document Using Group Dialling

If you frequently send faxes to the same group of people, you can create
a "group." Groups are stored under one-touch speed dialling buttons or
coded speed dialling codes. See Chapter 3, "Speed Dialling" for details
on registering numbers under groups and using group dialling.
Chapter 4
The MultiPASS C50 then scans the document into memory, and
begins sending it to the destinations in numerical order, starting
with the coded speed dial numbers, then the one-touch speed
dial numbers, and finally the manual number.
4-19
Sending Faxes