Receiving Faxes Automatically: Fax Only Mode - Canon MultiPASS C50 User Manual

Receiving Faxes Automatically: FAX ONLY MODE

When the MultiPASS C50 is set up for a dedicated line, set FAX ONLY
MODE to automatically receive documents whenever a call comes over
the fax line.
1. Make sure the MultiPASS C50 is set up to receive over a dedicated
fax line.
2. Press RECEIVE MODE to select FAX ONLY MODE.
RECEIVE MODE
5-8
Receiving Faxes
FAX ONLY MODE
The MultiPASS C50 assumes all incoming calls are from fax
machines sending documents. It receives the documents
automatically and disconnects all voice calls.
In FAX ONLY MODE, you can control whether or not the
MultiPASS C50 rings when it receives a fax call by enabling or
disabling the Silent Receive setting with the MultiPASS Desktop
Manager. However, please note that even if you enable this
setting, the MultiPASS C50 will only ring if you have a telephone
or the optional handset connected to it. See the MultiPASS
Desktop Manager User's Guide for details.
Chapter 5