Dialling Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If
your MultiPASS C50 is connected through a PBX or other telephone
switching system, you have to dial the outside line access number first,
and then dial the number of the party you are calling.
You can register the type of access and the outside line access number
under the R button, so that you only have to press the FUNCTION and
R buttons before dialling the telephone or fax number you wish to
reach. Follow the instructions below for registering the R button.
Registering the Access Type and the Outside Line
Number Under the R button
Follow these steps for registering the access type and the outside line
number under the R button:
1.
Press FUNCTION.
FUNCTION
Press < < or > > to select USER SETTINGS.
2.
1
2
Press START/COPY, then press < < or > > to select R-KEY SETTING.
3.
1
2
Press START/COPY, then press < < or > > to select PBX.
4.
1
2
4-20
Sending Faxes
FUNCTION
USER SETTINGS
R-KEY SETTING
PBX
Chapter 4