Table of Contents
Advertisement
Post-Repair Procedures
Post-Repair Procedures
Table 5-1
Post-Repair Procedures (Option 3L5)
Replaced
Required Adjustments
Assembly or
Correction Constants (CC)
Part
A50 CPU
No adjustment needed
module
DSP Card
Perform the following required
adjustments using "A51 DSP board" in
Spot Adjustment of the program.
Writing ID
Front Panel Board
No adjustment needed
Handler I/O
No adjustment needed
Board
HDD
Perform "HDD" (Hard Disk Drive) in Spot
Adjustment of the program.
Calibration of the Touch Screen (for opt.
016)
Power Supply
No adjustment needed
Assembly
Not adjustment needed
LCD
Touch panel (for
Calibration of the Touch Screen
Opt. 016)
Inverter Board
No adjustment needed
106
Verification
Inspect the Booting Process
Inspect the Booting Process
Executed all of the performance test.
"To Check the Front Panel" on page 38
"To Check the External Trigger Input" on
page 41
"To Check the Front Panel" on page 38
"To Execute the Diagnostic Test" on page 31
Inspect the Booting Process
Inspect the Booting Process
Inspect the Booting Process
"To Check the LCD" on page 40
Inspect the Booting Process
"To Check the Touch Panel" on page 39
Inspect the Booting Process
Chapter 5
Advertisement
Table of Contents
Troubleshooting
