Table 3-2 Lin Communication/Descriptions Of The Controls And Mechanicals - Fujitsu F2MC-8FX Series User Manual

Table 3-2 LIN communication/Descriptions of the controls and mechanicals

No. Name
1 Mode SW
2 Reset SW
3 SW2
4 SW3
5 Temperature sensor
6 Volume SW
7 Buzzer
8 LED (red)
Function Description
Switches between PROG mode and RUN mode.
Control PROG: Write a program
RUN: Run the program
Control Resets the MCU when pressed.
If SW 2 is pressed when the bits pot white SW4 is set to the
left, the value on the LED currently displayed in the starter
kit is incremented, and the bits pot white LED and 7SEG
Control
LED are also incremented.
If bits pot white SW4 is set to the right, no operation is
performed.
If SW2 is pressed when the bits pot white SW4 is set to the
left, the value on the LED currently displayed in the starter
Control kit is decremented, and the bits pot white LED and 7SEG
LED are also decremented. If bits pot white SW4 is set to
the right, no operation is performed.
When bits pot white SW4 is set to the right, the temperature
Control
of the starter kit temperature sensor is sent.
When bits pot white SW4 is set to the right, the information
of the starter kit Volume SW is sent.
Control
The sound of the bits pot white buzzer output changes when
the volume switch is operated.
Buzzer sounds are output when bits pot white SW4 is set to
the right. Further, the buzzer sound output changes
Mechanical according to volume switch operations.
In addition, if an error occurs during LIN communication, a
buzzer sound is output.
When bits pot white SW4 is set to the left, the count is
incremented or decremented by pressing starter kit SW2 and
Mechanical SW3, and bits pot white SW3 and SW5.When bits pot white
SW4 is set to the right, the temperature information from the
bits pot white temperature sensor is displayed.
64
AN07-00200-03E