AN07-00200-03E
2.1
Executing in single chip mode
In single chip mode, take the following procedures.
① Building a project
② Writing the program into the microcontroller
2.1.1
Building a project
Preparation
Decompress the following file in advance within the folder you decompressed in "1.1.1
Downloading the software".
¥ sample program¥
bitspot_yellow_SampleProgram.zip
Activate SOFTUINE (dedicated bits pot version).
In Windows, click the "Start" → "All Programs (P)", "Softune V3", → "FFMC-8L Family Softune
Workbench" to activate SOFTUNE as shown in "Figure 2-1 SOFTUNE Workbench start window".
Figure 2-1 SOFTUNE Workbench start window
36