Table 1-2 Description Of The Respective Parts Of A Starter Kit - Fujitsu F2MC-8FX Series User Manual

"Table 1-2 Description of the respective parts of a starter kit" provides descriptions of the respective
onboard parts.

Table 1-2 Description of the respective parts of a starter kit

No. Name
1 Target device
USB communication
2
microcontroller
3 Mode SW
4 Reset SW
5 Test SW
6 Temperature sensor
7 LED lamps
8 Volume SW
9 Buzzer
Power supply
10
lamp
11 USB connector
12 LIN connector
13 Regulator
14 LIN transceiver IC
15 Reset IC
Oscillator for
16 communications
microcontroller
17 Target device oscillator
Specifications
MB95F136JBS
MB89P585B
Slide switch
Push switch
Push switch x 2
NTCG164BH103
LED (red) x 3
Volume switch
PKLCS1212E40A1
LED
LED (green) x 1
mini-B
2-pin connector
LP3874EMP-3.3
TJA1020T
M51957BFP
USB
CSTCR6M00G55B
(6MHz)
CSTCR4M00G55B
Function
Main microcontroller (MB95F136JBS).
Microcontroller for USB communications to connect
the main microcontroller (MB95F136JBS) and the host
PC.
Switch for selection of operation mode of the main
microcontroller (MB95F136JBS).
Switch to reset the starter kit.
Push switches for
general-purpose I/O port.
NTC thermistor made by TDK.
Temperature sensor connected to the A/D converter.
LED lamps connected to the general-purpose I/O port.
Volume switch connected to the A/D converter input.
External-drive electric sounder made by Murata
Manufacturing.
Connected to the PPG timer output port.
LED lamp for the starter kit power supply.
USB connector for connection with the PC to write or
to debug a program.
Connector for LIN communication.
Connect this connector to the LIN connector on the bits
pot white.
Regulator IC (3.3V ).
Transceiver IC used for LIN communication.
Reset IC.
Ceralock made by Murata Manufacturing.
Oscillator for the USB communication microcontroller.
Ceralock made by Murata Manufacturing.
15
AN07-00200-03E
testing, connected to the