Figure 1-22 Connection Between The Pc And The Starter Kit - Fujitsu F2MC-8FX Series User Manual

After setting the MODE selector, connect the USB port on the PC and the USB port on the starter kit
using the USB cable included in the kit. Be sure to connect the PC and starter kit directly, without
using a USB hub.
Connect to the USB port on the PC.
For information about port locations and so forth, refer to the manual of the PC.

Figure 1-22 Connection between the PC and the starter kit

The power of the starter kit is supplied via USB. (USB bus power)
[Note]
When connecting the PC and starter kit, if the driver installation dialog is displayed, it is possible
that the USB driver has not been installed correctly. Return to "1.1.4 Connecting it to the PC and
installing the USB driver", and reinstall the driver.
Connect using the USB cable
included in the kit.
34
AN07-00200-03E
USB port