AN07-00200-03E
The dialog to select the file to which to be written is displayed as shown in "Figure 2-30 Selecting
the file to write", so select the file built in "2.2.1 Activating SOFTUNE and configuring the debug
settings ", and click the "Open" button.
¥bitspot_yellow_SampleProgram_monitor-debugger¥single_operation¥Debug¥ABS¥single_operati
on.mhx
If you built a LIN communication project in "2.2.1 Activating SOFTUNE and configuring the
debug settings ", select the following file, and click the "Open" button.
¥bitspot_yellow_SampleProgram_monitor-debugger¥LIN_communication¥Debug¥ABS¥LIN_com
munication.mhx
Figure 2-30 Selecting the file to write
54