Figure 2-9 Selecting The File To Write; Figure 2-10 Writing The Program - Fujitsu F2MC-8FX Series User Manual

AN07-00200-03E
The dialog to select the file to which to write will be displayed as shown in "Figure 2-9 Selecting the
file to write", select the file built in "2.1.1 Building a project", and click "Open".
¥bitspot_yellow_SampleProgram¥bitspot_yellow_SampleProgram_single-chip¥single_operation
¥Debug¥ABS¥ single_operation.mhx
If you built a LIN communication project in "Figure 2-6 Building a project", select the following file,
and click "Open".
¥bitspot_yellow_SampleProgram¥bitspot_yellow_SampleProgram_single-chip¥LIN_communicatio
n¥Debug¥ABS¥LIN_communication.mhx

Figure 2-9 Selecting the file to write

Click the "Full Operation" button as shown in "Figure 2-10 Writing the program" to start writing the
program. The program writing begins.
Click

Figure 2-10 Writing the program

41