Figure 2-31 Writing The Program; Figure 2-32 Completing The Program Writing - Fujitsu F2MC-8FX Series User Manual

AN07-00200-03E
Click the "Full Operation" button as shown in "Figure 2-31 Writing the program" to start writing.
The program writing begins.
Click this.

Figure 2-31 Writing the program

The dialog shown in "Figure 2-32 Completing the program writing" is displayed to notify you of the
completion of the program writing; press the "OK" button to quit PC Writer..

Figure 2-32 Completing the program writing

After completing the program writing, turn OFF the starter kit power supply, and set the Mode SW
to "RUN" before reconnecting the power supply to the starter kit.
55