AN07-00200-03E
Next, configure the debug settings. On the same project settings dialog, open the "Debug" tab. The
debug settings dialog opens as shown in "Figure 2-17 Debug settings".
Figure 2-17 Debug settings
Change the category from "General" to "Setup", and select "mon_dbg" from the setup name list. In
the setup name, "mon_dbg" is entered as shown in "Figure 2-18 Changing the debug settings". Here,
click the "Change" button to change the settings. (The setup wizard activates.)
Figure 2-18 Changing the debug settings
47