Connecting It To The Pc And Installing The Usb Driver; Figure 1-17 Installing Bgm Adapter (Mb2146-09) - Fujitsu F2MC-8FX Series User Manual
8-bit microcontroller bits pot yellow lin board
Hide thumbs
Also See for F2MC-8FX Series:
- Application note (53 pages) ,
- Setup manual (30 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
AN07-00200-03E
1.1.4
Connecting it to the PC and installing the USB driver
Connect the starter kit to the PC, and install the USB drivers.
First, connect the USB port on the PC and the USB port on the starter kit using the enclosed USB
cable. Whereupon, the "BGM Adapter (MB2146-09)" installation dialog is displayed as shown in
"Figure 1-17 Installing BGM Adapter (MB2146-09)". Select "Install from a list or specific location",
and click the "Next" button.
Figure 1-17 Installing BGM Adapter (MB2146-09)
30
Advertisement
Table of Contents
