AN07-00200-03E
As shown in "Figure 2-13 Selecting a workspace", the dialog that allows you to select a workspace
is displayed. Select the folder containing the sample program for the monitor debugger, and then
select the "bitspot_yellow_SampleProgram_monitordebugger.wsp" workspace, and click "Open".
¥bitspot_yellow_SampleProgram¥bitspot_yellow_SampleProgram_monitor-debugger¥
bitspot_yello
w_SampleProgram_monitordebugger.wsp
Figure 2-13 Selecting a workspace
The workspace opens, check that the "single_operation" project is set to the active project. To
change the active project to the project for the LIN communication, select the project for the LIN
communication as shown in "Figure 2-5 Changing the active project", and then right-click and select
"Set as Active project" from the sub-menu.
After setting the active project, click "Project" → "Build" from the menu as shown in "Figure 2-14
Building a project", to build it.
44