Table 3-1 Single-Unit Operation/Descriptions Of The Controls And Mechanicals - Fujitsu F2MC-8FX Series User Manual

Table 3-1 Single-unit operation/Descriptions of the controls and mechanicals

No. Name
1 Mode SW
2 Reset SW
3 SW2
4 SW3
5 Temperature sensor
6 Volume SW
7 Buzzer
8 LEDs (red)
Specifications Function
Switches between PROG mode and RUN mode.
Control PROG: Write a program
RUN: Run the program
Control Resets the MCU when pressed.
Turns ON and OFF the LED when pressed. Light up
Control LEDs 4 to 6 in order and turn OFF when they are all
ON, each time the switch is pressed.
Turns ON and OFF the buzzer outputs each time the
Control
switch is pressed.
Displays the temperature sensor information on the
Control LED.
The ON/OFF pattern depends on the temperature.
Change the buzzer sound when the sound is ON.
Control
Slide to the left to raise the tone.
Press SW 3 to sound the buzzer. Further, operate the
Mechanical
volume switch to change the tone.
This LED is turned ON either by pressing SW2 or by
Mechanical
the temperature sensor operations.
62
AN07-00200-03E