Cautions And Information Message - Furuno FELCOM 15 Service Manual

7.3 Cautions and information message

7.3 Cautions and information message
Note that the number of each message is not displayed.
"176 INF: Logout request accepted. Please wait."
"229 INF: Frequency Offset NG."
"000 Signalling Channel congestion."
"001 Lost TDM."
"002 Reservation Lost."
"003 The LES is out of service."
"004 Too many retries."
Messages for self test error
"144 TROUBLE: RFCON CPU ROM NG."
"146 TROUBLE: RFCON CPU RAM NG."
"152 TROUBLE: RFCON CPU EEPROM NG."
Messages for system trouble error
"230 TROUBLE: Synthesizer UNLOCK."
"226 TROUBLE: ANT power voltage abnormalty."
"227 TROUBLE: INCOMMING INDICATOR Fault."
"228 TROUBLE: DMC connection abnormality."
"236 TROUBLE: DISTRESS ALERT UNIT Fault."
"224 TROUBLE: Carrier power level."
"234 TROUBLE: EEPROM ERROR."
"235 TROUBLE: Invalid MES ID, This equipment is defected. Please contact FURUNO."
Messages for warning
"231 WARNING: Memory Full for receive message."
"233 WARNING: Message received for DTE PORT. Please turn on DTE port equipment."
"249 WARNING: Internal GPS UNIT failure."
"240 WARNING: External NAV equipment failure."
"242 WARNING: Can not enter new ENID. Memory Full for ENIDs."
"248 WARNING: Can not enter new DNID. Memory Full for DNIDs."
"143 WARNING: Synchronization loss. Please change EGC Channel."
"128 WARNING: Synchronization loss. Please check the current NCS."
"128 WARNING: Synchronization loss. Scanning NCS started automatically."
"128 WARNING: BBER over 80%. Scanning NCS start manually."
"131 WARNING: Can not find NCS CC in preferred region.
Scanning all region is started."
"132 WARNING: Can not find NCS CC in all region. Scanning is continued."
7-10