Configuration: [F8]-9 - Furuno FELCOM 15 Service Manual

9. Configuration: [F8]-9

Item
Station Group
Station Name
Destination Type
Prefix code
1. Station List
(Max.99 stations)
Country/Ocean Code
Station ID
Modem Type
E-mail Address
Remark
Name
ID
2. LES List
Remark
(Max. 64 stations
x 4)
Charge
3.EGC
Max. 4ch x 4
channel List
4.NCS
Max. 20ch x 4
Channel List
Service Station
Name
Service ID
LES ID (AORW) to
IOR
5.E-mail
To:
Service List
Cc:
(Max. 16 stations)
Subject:
Separator
Attach File (MIME)
Save to FD
6. Save/Load
Load from FD
Contents
When registering the station more than two, the
station is divided into groups by this setting.
This function is available when the station for
sending the message is selected by Transmit
Message ([F3]-1).
Inputs the station name.
Setting by which Destination Type the message is
sent. Selects from TELEX to SPEC (Prefixed).
Inputs when Prefix is selected from Destination
Type.
Registers the country or the ocean code of the
station for sending the message.
Registers the station number of the station for
sending the message.
T30 (FAX)
When Destination Type is set to FAX, select T30
(FAX).
Registers the E-mail address.
Sets to Remark if necessary.
Registers LES name.
Registers LES number.
Sets to Remark if necessary.
Registers the communication charge of each
Destination Type if necessary.
Registers the additional channel.
Registers the LES name.
(Enter ID: max. 9 char.)
EX) Comsat: INET, Station12: 400
Registers the LES number of each service region.
Registers according to the header format of the
LES.
Setting which code is used when the attached file is
sent.
Code: OFF, BASE64 and UUENCODE
When set to off, the attached file is not sent.
See page 5-24
4-7
4.1 System menu (F8)
Description