Furuno FELCOM 15 Service Manual page 46

IP Address
Subnet mask
Network
DHCP
Gateway
SMTP Enable IP Address
Send Limit Size(KB)
Attach
Delivery To
Mail Gateway
Server IP
Address Mode
Mail Address
Mail Address Keyword
** Network ** (Refer to AP-4)
IP Address/Subnet Mask
Default settings are as below.
IP address:
Subnet mask:
DHCP(Dynamic Host Configuration Protocol)
With DHCP turned on, IP address and subnet mask are automatically assigned when a
DHCP server resides on a LAN. The default DHCP setting is OFF.
Gateway
Set gateway IP address when mail is sent from a PC on a different network through a router.
** Mail Gateway ** (Refer to AP-4)
SMTP Enable IP Address
Specify the IP address of the PC which is to be used to send and receive e-mail. A PC not
specified cannot send e-mail but it can receive e-mail. If no IP address is specified, all PCs
connected to the LAN can send and transmit e-mail.
Send Limit Size(KB)
To choose maximum message size to send within shipboard LAN. The choices are 2, 4, 6, 8,
10 and 32 (KB).
Attach
Using the default setting, mail (MIME encoded) sent from a PC in a network is encoded
with UUENCODE. For Inmarsat C use UUENCODE.
Table 2.3.7 [F8]-2 System Setup menu (abstract)
ON
OFF
2, 4, 6, 8, 10, 16, 32
UUENCODE
BINARY
PC Mailer
Server
FIXED
Auto
Note) When FIXED is selected in Address Mode
172.31.16.1
255.255.0.0
2-24
Note) When OFF is selected in DHCP setting.
Note) When Auto is selected in Address Mode
2.3 Terminal unit, IC-215