Furuno FELCOM 15 Service Manual page 119

*** Receive ***
"065 Successful Receiving message."
"066 Receiving message failed."
"067 Receiving message aborted."
"069 MES Signalling Failure, during receiving message."
"070 Receiving message aborted by LES because of"
*** Data Report ***
"122 Successful Poll Acknowledgement Sending."
"123 Poll Acknowledgement Sending failed."
"113 Successful Data Report Sending."
"120 Data Report aborted."
"119 Reserved access failure, trying unreserved access."
"121 Data Report faild, too long report."
"114 Data Report failed, unauthorized DNID."
"115 Data Report failed, MES is not login."
"118 MES Signalling Failure, Data Report failed."
"116 Data Report failed, selected LES not exist in current region."
"117 Data Report failed, TDM LOST."
"124 Successfull Data Report Programing by Polling."
"125 Data Report Programing failure by Polling, invalid parameters."
"126 Data Report Program has been initiated by Polling."
"127 Data Report Program has been stopped by Polling."
*** PV TEST ***
"097 PV TEST is completed."
"098 PV TEST is failed."
"099 PV TEST is aborted."
"101 MES Signalling Failure, during PV TEST."
"102 Receiving Test Failure, Timeout while waiting on NCS CC."
"103 Sending Test Failure, Too many retries."
"104 PV TEST is aborted by LES because of"
"105 PV TEST is pending by LES because of"
"106 PV TEST is rejected by LES because of"
"107 PV TEST aborted because of RESTORATION mode."
"108 Please activate Distress Alert TEST within 2 min."
"109 TIMEOUT !! Distress Alert Test is automatically activated."
*** Forced Clear ***
"033 Successful Forced Clearing."
"034 Forced Clearing failed."
"035 Forced Clearing aborted."
"037 MES Signalling Failure, Forced Clear not sent."
"036 Timeout! Clear not received."
7.3 Cautions and information message
note1)
note1)
note1)
See
page 7-14.
note2)
See
page 7-15.
7-13
See
page 7-14.
See
page 7-14.