Furuno FELCOM 15 Service Manual page 67

Inmarsat-c mobile earth station
Hide thumbs Also See for FELCOM 15:
Table of Contents

Advertisement

NAV Port
OFF/ EXT/ INT
INT
Active Port
ALL
INT
EXT
INT+EXT
Message
Output Port
AUTO
INT
EGC Output
Port
INT+EXT
IP Address
Subnet mask
Network
DHCP
(See page AP4)
Gateway
SMTP
Address
Mail Gateway
Send Limit Size
(See page AP4)
Attach
- INT: Sets when the built-in GPS is installed
(GN-79: option)
- EXT: Sets when the external GPS is connected.
Note that the alarm is released when the NMEA
data is stopped. See page 2-15.
- OFF: Inputs manually the position data from [F9].
Note that the alarm is released when the data is
not updated every 4 hours.
The received message is output to the Terminal
unit: IC-215 only.
The transmission and the reception is available
from the Terminal unit: IC-215, the PCs connected
to DTE and LAN port.
Setting for the message output. Only valid when the
setting of "Active Port" is ALL.
- INT: Outputs to the Terminal unit: IC-215.
- EXT: Outputs to DTE and LAN port.
- INT+EXT: Outputs to the IC-215, DTE and LAN
- AUTO: Outputs to the ports according to Sub
Setting for the message output. Only valid when the
setting of "Active Port" is ALL.
- INT: Outputs to the Terminal unit:IC-215.
- EXT: Outputs to DTE and LAN port.
- INT+EXT: Outputs to the IC-215, DTE and LAN
port.
Default setting: 172.31.16.1
Default setting: 255.255.0.0
With DHCP turned on, IP address and subnet mask
are automatically assigned when a DHCP server
resides on a LAN. The default DHCP setting is
OFF.
Set gateway IP address when mail is sent from a
PC on a different network through a router.
Specify the IP address of the PC which is to be
used to send and receive e-mail. A PC not specified
Enable
IP
cannot send e-mail but it can receive e-mail. If no
IP address is specified, all PCs connected to the
LAN can send and transmit e-mail.
2,4,6,8,10,16,32KB
UUENCODE;
Using the default setting, mail (MIME encoded) sent
from a PC in a network is encoded with
UUENCODE. For Inmarsat C use UUENCODE.
BINARY
4-3
port.
Address.
Note) Sub Address;
IC-215 and LAN port: 000
DTE: 001
4.1 System menu (F8)

Advertisement

Table of Contents
loading

Table of Contents