Program Files; Installing Terminal Software To Pc - Furuno FELCOM 15 Service Manual

6.2 Program files

Each program disk contains following files. Note that the file size is reference only.
TERM CPU
File
Boot.ini
Termcpu.bin
Loadfd_a.bin

6.3 Installing Terminal software to PC

The terminal software of FELCOM15 is required to install to the PC connected to
[DET] port.
- Type: 16-5-0164
- Program number: 1650164-xx
OS: Windows 95/98/2000/NT/ME/XP
Memory: 32 MB and more
Free space on the hard disk: 20 MB and more
CPU: Pentium 100 MHz and more
Floppy disk drive: Available
The procedure to update terminal software is the same as that of software installation.
To install/update terminal software;
1. Insert PC terminal program floppy disk into the floppy disk drive.
2. Double click "Setup.exe" file, and the installation starts automatically.
Size File
1k Boot.ini
683k Loadrfc.bin
46k Rfconcpu.bin
Uprfcon.bin
- Code No.: 000-4438-920
6-3
Table 6.2.1 Program files
RF-CON CPU
Size
1k
5k
360k
43k
6.2 Program files