Furuno FELCOM 15 Service Manual page 118

*** Distress Alert ***
"080 Distress Alert activated."
"081 Distress Alert completed."
"082 Distress Alert Test completed."
"083 Distress Alert Test aborted."
"084 Distress Alert Test failed."
"089 Distress Alert not sent to LES, trying to use NCS."
"087 Distress Alert not sent to NCS. NCS scanning is started."
"088 MES Signalling Failure, Distress Alert Test not sent."
"085 Timeout! Distress Alert not acknowledged.
Distress Alert abandoned, Please re-send Distress Alert."
"086 Timeout! Distress Test not acknowledged."
"090 Low-Power-C mode does not supply Distress Call."
"091 Timeout! Distress Acknowledgement not received. Scanning NCS started automatically."
*** Failed Timeout ***
"092 Distress Alert aborted."
"093 DISTRESS ALERT interrupt accepted."
"094 Distress Alert not sent to NCS. Distress Alert abandoned. Please re-send Distress Alert."
*** Distress Alert ***
"095 Pre-set LES ID for DISTRESS ALERT is invalid in this ocean.
Please input preferred LES ID in the menu [Distress Message Setup]."
*** Transmit ***
"049 Successful Sending message to LES."
"050 Sending message failed."
"051 Sending message aborted."
"057 MES Signalling Failure, during sending message."
"052 Sending message aborted by LES because of"
"053 LES protocol error detected, Invalid Assignment."
"054 Call rejected by LES because of"
"055 Call pending by LES because of"
"056 Selected LES not exist in current region."
"058 Awaiting message transfer."
"059 Message sendding failure, unauthorized DNID LES_ID pare."
"060 Successful Delivery Status Request."
"061 Delivery Status Request is failed."
"062 Delivery Status Request is aborted."
"063 MES Signalling Failure, Delivery Status Request not sent."
"015 Timeout! LES response not received."
7.3 Cautions and information message
note1)
note2)
note1)
7-12
See
page 7-14.
See
page 7-15.
See
page 7-14.