Furuno FELCOM 15 Service Manual page 93

5.6 DIP switch and Reset switch on IC-215
Fig.5.6.1 and Fig.5.6.2 show the switches on the RF CON/CPU board and TERM CPU
board.
S1: Dip SW
Fig.5.6.1 Dip Switch on RFCON/CPU board
Table 5.6.1 lists the function of DIP switch.
Board S1
#1
RFCON/CPU #2
(S1) #3
#4
#1
TERM CPU #2
(S5)
#3
#4
Table 5.6.2 lists the function of the reset switch on the TERM CPU board. No need to
work for these switches.
Switch
S1: CPU Reset
S2: ULTRA I/O Reset
S3: QZI Reset
S1: CPU Reset
S5: Dip SW
Factory
default
OFF For factory adjustment (For writing the boot program.)
OFF
Not used
OFF
OFF For factory adjustment
OFF Not used
OFF For factory adjustment
(For the check for ALM function)
OFF
OFF Not used
Reset switch for CPU (U28). Same as the power-on and off.
Reset switch for ULTRA I/O (U7). (I/O action remains stopping.)
Reset switch of QZ1(U21) for controlling LCD.
5-17
5.6 DIP switch and Reset switch on IC-215
S2: ULTRA I/O Reset
S3: QZI Reset
Fig.5.6.2 Switches on TERM CPU board
Table 5.6.1 Function of DIP switch
Function
Table 5.6.2 Function of Reset switch
Action