Table of Contents
Advertisement
5. MAINTENANCE, TROUBLESHOOTING
5.4
System Data
The system data display allows you to confirm the equipment and drive system status.
To show this display, open the [System Setup] menu, select [System Data] then push
the Course control knob. For details of the [System Setup] menu, see section 4.8.
To close the system data display, press the
Items on the system data display
• [Input Voltage]: Voltage input to the NAVpilot.
• [Controller ID]: ID of the controller that displays the system data
• [Drive Type]: Drive type used with the NAVpilot. Not shown when [Boat Type] is set
to [EVCS Boat].
• [Bypass/Clutch]: Presence or absence of bypass/clutch. Not shown with Fantum
Feedback
• [P/C Temp]: Temperature of processor unit / control unit.
• [Motor Drive Cur]: Motor drive current. Max. value is 25.0 A.
• [Bypass/Clutch Cur]: Bypass/clutch current. Max. value is 3.0 A. Not shown with
Fantum Feedback
5.5
Messages
Your equipment displays messages to alert you to potential equipment problem and
operation status.
5.5.1
Message pop-up display
When the system detects alarm violation, error, etc., an error message and alarm icon
(
) appear and the alarm sounds. To stop the alarm and close the message, press
any key. If the error occurs frequently, contact your dealer.
5-12
Input Voltage: 24.4 V
Controller ID: 2
Drive Unit: Reversible 24V
Bypass/Clutch: Not Present
°
P/C Temp: 71.3
Motor Drive Cur: 10.0 A
Bypass Clutch Cur: 0.0 A
™
or when [Boat Type] is set to [EVCS Boat].
™
.
°
F/91.1
F
key.
Advertisement
Table of Contents
