Conducting Image Erasure Only [Primary Erasure] - FujiFilm FCR XG-1 Operation Manual

Operations
2.4

Conducting Image Erasure Only [Primary Erasure]

To erase an image on IP --- owing to exposure errors, etc. --- without reading it, use the
following procedure to conduct "Primary Erasure Processing." Operation procedures follow.
1 Press the
area of the CR Console.
2 "Primary Erasure Processing" has thus been specified for the cassette to be inserted.
Insert the cassette in the cassette setting unit. The IP contained in the cassette will be
subjected to "Primary Erasure Processing."
As the IP returned to the cassette will have been undergone "Primary Erasure Processing,"
it now can be used for exposure.
Z
When "Primary Erasure Processing" has been specified, the setting (display) will
be returned to default status ("Reading") at the stage the cassette is inserted. The
setting is thus valid one time only.
010-021-20 09.2001
Erasure Selection Switch twice to select "Primary Erasure Processing."
Pressing this button once will select
"Secondary Erasure Processing."
Pressing this button once more will select
"Primary Erasure processing."
will be displayed in the Reading Unit status display
Cassette Insertion Lamp must be lit.
1
2
3
A
B
C
Y
Z
2-19