Usage Precautions - FujiFilm FCR XG-1 Operation Manual

Hide thumbs Also See for FCR XG-1:
Table of Contents

Advertisement

Introduction

1.2.5 Usage Precautions

We ask that you heed these usage precautions and use the equipment correctly.
1. This equipment should be used only by people who have the proper skills.
2. Heed the following precautions when installing the equipment.
2-1. Install the equipment where water will not splash it.
2-2. Install the equipment where it will not be adversely affected by air pressure,
temperature, humidity, ventilation, sunlight, dust or the presence of salt, sulfur or
like substances in the atmosphere.
2-3. Make sure the equipment will remain in stable condition, kept level and not
subjected to vibration or shock.
2-4. Do not install the equipment in places where chemicals are stored or gases
emitted.
2-5. Make sure that the power frequency, voltage and power consumption are
appropriate.
2-6. Connect the ground wire correctly.
3. Observe the following precautions before beginning to use the device.
3-1. Inspect the switch contacts, polarities, dial settings and meters and confirm that
the equipment is functioning properly.
3-2. Confirm that the ground wire has been completely connected.
3-3. Make sure that all cords have been connected properly and safely.
3-4. Be aware that correct diagnosis can be hindered and danger can result from
using different pieces of equipment together .
4. Heed the following precautions after using the equipment.
4-1. Using the established procedure, restore the operation switches, dials, etc., to
what they were prior to use and then turn the power off.
4-2. When unplugging cords, do not pull on the body of the cord itself or apply
unnecessary force.
4-3. After using the accessories, recollect them and put them back in order.
5. If there is trouble with the equipment, do not attempt to fix it randomly. Instead, do
what is indicated and entrust repairs to a professional.
6. Do not remodel the equipment.
7. Maintenance and Inspection
7-1. Make inspect the equipment and parts periodically.
7-2. If the equipment has not been used for a long time, make sure that it operates
normally and safely prior to using it again.
8. Other Items
8-1. When subjecting patients (particularly infants and pregnant women) to radiation,
make sure not to exceed the necessary time and dose. Also, ensure that radiation
is contained within the region for exposure.
8-2. For cleaning and disinfecting the parts that patients come in contact with in a
normal usage environment, slightly moisten a soft cloth (non-woven cloth:
Kimwipe
not use any other cleansers or disinfectants. Also, do not scrub the equipment's
surface vigorously.
8-3. Follow the Operation Manual and operate the equipment correctly.
010-021-20 09.2001
®
) in neutral detergent or ethanol anhydride and wipe away any dirt. Do
1
2
3
A
B
C
Y
Z
1-5

Advertisement

Table of Contents
loading

Table of Contents