Operations
2.5
Removing Dust
Regularly remove dust accumulated inside the Reading Unit using the procedure below.
Touch the
When the following menu appears, touch the
This procedure will be completed in about 15 seconds.
Z
When a multiple number of Reading Units, including this device (CR-IR346RU),
are connected to the CR Console, select a Reading Unit you wish to clean and
then perform the "Removing Dust" process.
2-20
Utility button on the right of the Reading Unit status display area.
1
Touch this icon to display
the pulldown menu.
2
Select a Reading Unit.
Check to see that the selected
3
Reading Unit is displayed here.
Dust Removal button.
1
Touch this button.
Perform the "Removing
4
Dust" process.
2
Touch this button.
010-021-20 09.2001