FujiFilm FCR XG-1 Operation Manual page 53

Film Annotation
[Table. C-1] Initially Set Film Annotaiton
Name
(1) Hospital name
(medical institution name)
(2) EDR mode and menu code
(3) System ID and image No.
(4) Patient ID
(5) Patient name
(6) Date of exposure
(7) Sex
(8) Age or date of birth
(9) Set processing information
(10) Film mark
(11) Reduction ratio
(12) IP barcode No.
(13) Image processing condi-
tions
(14) Exposure menu
(15) Standardization conditions
and correction item
(16) Image reversal mark
(17) Exposure time
010-021-20 09.2001
Meaning
The name of the hospital (or medical institution) will be displayed.
The EDR mode and the menu code will be displayed.
(* Only the menu code will be displayed in the Standard Film Annotation.)
The system ID is an identification code particular to the Image Reader,
which will be displayed in reverse video by one of the letters from A to Z.
The image no. displayed in three digits represents a serial no. that
indicates order of image reading of the day.
The patient ID will be displayed.
The patient name will be displayed.
The date of exposure will be displayed.
Female or male will be displayed.
Either age or date of birth will be displayed.
The batch processing information will be displayed.
The exposure direction will be displayed.
The reduction ratio of the image will be displayed.
The IP bar code No. will be displayed.
The image processing conditions according to the selected exposure
menu will be displayed.
The exposure menu will be displayed.
The standardization conditions for latitude and system sensitivity will be
displayed.
Displayed when the image is reversed.
The time when the IP has been registered at the CR Console (the time when
the study has been started) will be displayed.
1
2
3
A
B
C
Y
Z
C-3