FujiFilm FCR XG-1 Operation Manual page 49

IP Handling
2.3 Cleaning
(1) Materials required
Lint free non-woven cotton
Gauze (100% cotton),
Lens cleaner such as Toraysee
(2) Method
1 With a dry cloth of materials listed above, wipe off the IP surface as illustrated below (A
or B).
A
2 For stains which fail to come off by cleaning with dry cleaning cloths, dampen the
above cloth with ethanol anhydride (JIS standards or special standards) before clean-
ing. (Do not use another cleaning agent.)
When the IP surface has been cleaned using ethanol anhydride-dampened cloths, slightly
wipe it off with dry cloths listed above. Make sure the surface of the IP is completely dry
before use.
Z
Frequent cleaning with ethanol anhydride can cause yellowing of the IP edges.
(3) Precautions
1 Be sure not to damage the IP.
2 Never use eraser or any other solvents.
3 Do not scratch the IP with your nails.
Z
Do not apply light to the IP exposed but not yet processed.
010-021-20 09.2001
®
B
1
2
3
A
B
C
Y
Z
B-3