FujiFilm FCR XG-1 Operation Manual page 27

Operations
Changing the Parameters
Step 5
Once the reception of studies has been completed, the "Start Study" screen like that shown
below will appear.
Z
If [Reserve Study] is selected at
tab to display the reservation list. Select then the target study and touch
(execution key). The "Start Study" screen will appear.
Touch (parameter setting button) on the lower right of the screen.
[ Fig. 2.13 ] Start Study Screen
The parameter setting screen appears. Perform the following user settings accordingly.
(For detailed operation procedures, see the [CR Console Operation Manual].)
Selecting the frontal or right-and-left reverse image
Setting EDR mode
Selecting function processing
Setting the number of output films
Selecting logical reading
010-021-20 09.2001
above, touch the "Study Reservation"
Step 4
Selecting one- or two-image output
Selecting filing ON/OFF
Setting the film mark
Setting the image distribution code
Setting CS/SS
1
2
3
A
B
C
Y
Z
1
Touch this
button.
2-11