Start And Stop Cutter Head - Wood-mizer Slab-Mizer MB200 Operation Manual

5 Planer Operation

Start and Stop Cutter Head

5.5 Start and Stop Cutter Head
1. The Planer's Cutter Head is activated using the Motor Start (|) & Stop (o) buttons located
on the control pendant.
5-4
Hand Turning
Wheel Squeeze
Handle To Adjust
CAUTION: Before activating the cutter head clear the working
area of any tools, debris or other obstacles that could cause
interference with cutter.
DANGER: make sure the user and all personnel are clear of
the cutter head before activating. failure to do so can result in
Serious Injury or death.
WMdoc082019
FIGURE 5
Planer Operation